Best 10 Methods to Fix “No Internet Secured” Error on Windows PC

Whenever your Windows PC experiences “No internet secured” issue, you can simply fix it by performing simple methods we provide in this article. If your computer is connected to an internet network but you cannot open a web page, then it is possible that there are some issues with the router or the connection itself. Just like the “DNS server unavailable” issue, your web browser will not be able to open web pages in case “no internet secure” error occurs. In case this type of error occurs, always make sure to check the internet connection and the computer programs which currently run some updates.

If your Windows PC runs updates on different types of programs, you will need to check whether or not the updates clash with one another. The clashes of updates may often result in the “no internet secured” Wifi error. To avoid this type of error, you can check the program which takes up the most internet network space with the Task Manager. Other than that, you can also check the internet network first to see if it operates properly.

Since the “no internet secured” error message can disturb your work progress, you can try to fix it immediately to continue the work. Whether the problem comes from the misconfiguration of the IP address or the updates clashes, you can find a way to fix it with the solutions we provide below. Take a look at the methods to fix the “no internet secured” Wifi error on Windows PC and see which one works for you.

How to Fix “No Internet Secured” Error on Windows PC

How to Fix No Internet Secured Error
How to Fix No Internet Secured Error

Before you perform one of the methods below, you must remember to create a restore point first. In case anything goes wrong, you can always turn the system back to its previous state.

Check out these methods below and see which one works to get rid of the “no internet secured” message on your PC.

Updating Network Adapter Driver

In case you find this issue repeating over time, you can try to update your network adapter driver. It is possible that the adapter driver needs an update to work without a problem. In order to do that, you can try to find the network adapter manufacturer driver and install it at once. Other than that, you can also try to update it from the best driver updater. After the installation finishes, you can try to open a web page on your browser and see if it works.

If the error still persists, then you need to update the network adapter driver manually. In order to do that, follow the steps below.

  1. Open the Run box by pressing Windows and R buttons at the same time.
  2. Once the Run box appears, you can type devmgmt.msc in the search box and press Enter.
  3. Afterward, the Device Manager window will appear.
  4. Look for the option “Network adapters” and expand it.
  5. Afterward, find the option of Wi-Fi controllers, such as Broadcom or Intel, and right-click on it.
  6. Once the options appear, choose the option “Update Drivers”.
  7. Afterward, you can look for the option “Browse my computer for driver software“ and click on it.
  8. Then, choose the option “Let me pick from a list of available drivers on my computer“.
  9. Update the drivers from the options listed and click Next. The updates will take some time until it finishes.
  10. At last, reboot your Windows PC to save and apply the changes.

Reinstalling Network Adapter

  1. Open the Run box by pressing Windows and R buttons at the same time.
  2. Once the Run box appears, type in devmgmt.msc and press Enter.
  3. On the Device Manager window, locate the section “Network Adapters”.
  4. Expand the Network Adapters and find network adapter on your Windows PC.
  5. Proceed to right-click on the network adapter and choose Uninstall.
  6. Afterward, restart your Windows PC as the system will automatically install the default driver of the Network Adapter.
  7. In case you cannot connect to the internet after, then it means the driver software is not automatically installed.
  8. If that is the case, you will need to download the driver and install it by yourself.
  9. Once the installation finishes, you can reboot your Windows PC to apply the changes.

In case the “no internet secured” Wifi error comes from the hardware, then you can always check the networking hardware first before you check on anything else. Try to see if one of the hardware experiences some errors. Here are the things you need to inspect:

  • Inspect the network connections and make sure the cords are connected properly.
  • Check whether the Wifi router works and has a good signal.
  • At last, see if the wireless network button is “ON” on the device.

Disabling Wifi Sharing to Get Rid of “No Internet Secured” Message

Whenever your Windows 10 finishes any updates and see the “no internet secured” Wifi error message, the issue may come from the conflict between the router and the wireless driver. To fix this, you can disable the Wifi sharing to fix the issue in the system. Follow these steps below to perform this method.

  1. Open the Run box by pressing Windows and R buttons at the same time.
  2. Once the Run box appears, type ncpa.cpl in the search box and press Enter.
  3. A new window will appear shortly. On that, you can look for the option “Wireless Adapter” and right-click on it.
  4. On the list of options, click on the option “Properties”.
  5. Look further down and untick the box next to “Microsoft network adapter multiplexor protocol”. In addition to that, you can untick the options related to Wifi sharing.
  6. Afterward, you can try to connect the internet or Wifi router again.

Modifying TCP/IPv4 Properties

In case the “no internet secured” Wifi error keeps happening, you can try to modify the IPV4 properties. Follow the steps to perform this method.

  1. Open the Run box by pressing Windows and R buttons at the same time.
  2. Once the Run box appears, you can type ncpa.cpl. Press Enter to continue.
  3. Find the option “Wireless Adapter” and right-click on it.
  4. On the list of options, select Properties.
  5. Then, locate the option “Internet Protocol 4 (TCP/IPv4)” and double-click on it.
  6. Check on the box marks next to these two options.
    Obtain an IP address automatically
    Obtain DNS server address automatically.
  7. Afterward, click the “Advanced” option and head to the WINS tab.
  8. Find the section titled “NetBIOS” and look under the setting. There, you will need to click on the option “Enable NetBIOS over TCP/IP”.
  9. At last, click OK to save the changes.

Disabling IPv6 to Fix “No Internet Secured” Error

  1. Open the Run box by pressing Windows and R buttons at the same time.
  2. Once the Run box appears, then type the following command and press Enter.
control.exe /name Microsoft.NetworkAndSharingCenter

3. Click on the current network your device is connected to, and open Settings.

4. Head to the Properties option on the Wifi Status window.

5. Afterward, untick the Internet Protocol Version 6 (TCP/IPv6).

6. At last, click OK then click Close.

7. Reboot your Windows PC to apply the changes.

Changing the Wifi Connection Property

  1. Open the Run box by pressing Windows and R buttons.
  2. Once the Run box appears, type in ncpa.cpl and press Enter.
  3. Look for the option “Wireless Adapter” and right-click on it.
  4. Among the options presented, choose Properties.
  5. Make sure to check the following options on the Properties tab.
    • Client for Microsoft networks
    • File and printer sharing for Microsoft networks
    • Link-layer topology discovery mapper I/O driver
    • Internet protocol version 4, or TCP/IPv4
    • Internet protocol version 6, or TCP/IPv6
    • Link-layer topology discovery responder
    • Reliable Multicast Protocol
  6. Afterward, click Apply and OK to save the changes.
  7. At last, reboot the Windows PC and restart the Wifi router.

Changing the Properties of Power Management

  1. Launch the Run box by pressing Windows and R buttons at the same time.
  2. Once the Run box appears, type in devmgmt.msc and press Enter.
  3. Look for the option “Network adapters” and expand it.
  4. Proceed to locate the wireless network your device is connected to and double-click on it.
  5. Head to the Power Management tab.
  6. Untick the option “Allow the computer to turn off this device to save power”.

Running the Network Troubleshooter to Get Rid of “No Internet Secured” Message

  1. Go to the Windows Settings and find the section “Update & Security”. Click on it.
  2. On the left-hand menu, choose the option “Troubleshoot”.
  3. Afterward, find the option “Internet Connections” and select it.
  4. Then, click the option “Run the troubleshooter”.
  5. Follow the instructions to run the troubleshooter.
  6. Alternatively, click on the option “Network Adapter” and select the option “Run the troubleshooter”.
  7. At last, reboot your Windows PC to save the changes.

Resetting Network Configuration to Fix “No Internet Secured” Error

If you still get “no internet secured” message after performing the above methods, try to reset the network configuration then. To do so, follow the steps below.

  1. Access Command Prompt or Windows PowerShell through the admin account on your Windows PC.
  2. On the Command Prompt, type in the commands below.
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

3. Restart your Windows PC and check if you can open a web page again on your browser once it turns back on.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.